Skip to content
SmartHome.ExposedSmartHome.Exposed logo
  • Home
  • Blog
  • Forum
  • About this web
SmartHome.Exposed
  • NodOn EnOcean push-button
    Devices | Loxone | Sensors

    EnOcean push buttons and actuators

    December 31, 2019February 23, 2026

    EnOcean is well known low power wireless standard and as a technology it is being integrated into wide range of home automation solutions, either as an integral part of the smart home ecosystem, or as an standalone wireless technology used for some sort of dedicated remote control (blinds, garage door, remote wall switch, …). It…

    Read More EnOcean push buttons and actuatorsContinue

  • DC/DC converter MEAN WELL DDR-15G-12
    Devices | Solutions | Wiring

    Intergating 12V devices into 24V system

    December 7, 2019December 31, 2019
    1 Comment

    Home automation systems like Loxone do require 24V DC power supply. In most cases the infrastructure is fed by one separate PSU unit, which has some kind of power outage protection (UPS, either on its primary side AC, or the DC side), and is separated from the other high-consumption components (like LED strips, valves, locks,…

    Read More Intergating 12V devices into 24V systemContinue

  • DoorBird-Door-Chime-front
    Devices

    DoorBird Chime

    May 11, 2019May 29, 2019
    11 Comments

    If you already have DoorBird intercom installed (like I do) there is an interesting peripheral device you can pair it with to either become your primary source of doorbell sound, or to just enlarge the area where you want to be notified about the doorbell press. And that all over your existing network. There are…

    Read More DoorBird ChimeContinue

  • Infra remote from Apple
    Devices | DIY | Solutions

    Infrared remote for HiFiBerry

    March 15, 2019May 29, 2019
    1 Comment

    There are situations where it is not very convenient to use the phone or tablet to control the music. Sometimes you just need to quickly change the volume, pause the playback or skip a song on a playlist, and this can be done much easier using a IR remote. Adding an infrared remote to the Raspberry…

    Read More Infrared remote for HiFiBerryContinue

  • HiFi-Berry-for-multiroom-audio
    Configuration | Devices | DIY | Loxone | Solutions

    Loxone multiroom audio using HiFiBerry and Max2Play

    March 15, 2019May 29, 2019
    10 Comments

    Loxone offers their own out of box solution for multiroom audio which consists of  Loxone Music server, multi-channel Amp and various types of wired speakers. The topology requires audio cabling prepared between the centrally located (potentially rack mounted) amplifier and all the places where you would like to listen to your music. It is the…

    Read More Loxone multiroom audio using HiFiBerry and Max2PlayContinue

  • DoorBird D2101V front panel
    Configuration | Devices | Solutions

    DoorBird intercom with Loxone

    February 16, 2019May 29, 2019
    38 Comments

    I have been constantly postponing most of the construction finalizations in front and around the house, in order to complete the interior and garden in the back first. That took longer than I expected and as a result some of my initial plans were a bit re-shaped and diverted from the original intent. This was…

    Read More DoorBird intercom with LoxoneContinue

‹ 1 … 3 4 5 … 8 ›

© 2026 SmartHome.Exposed

  • Home
  • Blog
  • Forum
  • About this web